I confirmed with our vendors that there is not a trailer hitch receiver available at this time for your 2020 Land Rover Evoque, but there will be one available in the near future. An alternative would be to use a trunk-mounted bike rack such as the Yakima FullBack Bike Rack. which is confirmed to fit the trunk of your vehicle. For 2 bikes you will need # Y02634 and for 3 bikes you need # Y02633.
Both of these bike racks come with a built-in cable lock to secure your bikes to the carrier.... view full answer...
Yes, we do have the Rhino-Rack Backbone Mounting System for your 2005 Land Rover LR3 with a naked roof:
- Rhino-Rack Backbone Mounting System # RRRD4B1
Please note that this system is designed around installing the Pioneer Platform Rack so you might need to make adjustments for your application if you don't plan on using it for the Pioneer. view full answer...
The Tow-Ready trailer connector adapter # 20142 is designed to work on a range of European import vehicles. This adapter will prevent the low current draw from your trailer's LED lighting from triggering error messages on your Range Rover dashboard display. view full answer...
The aftermarket hitches we offer for your 2013 Land Rover Evoque are all the 2-inch Class III variety like Curt # C13128 but it sounds like your OEM hitch is a 1-1/4-inch Class II and that's why you need a hitch adapter to let you use your 2-inch Thule bike rack.
We offer adapter # HT5R that will fit your 1-1/4-inch hitch and give you the 2-inch receiver opening you need for your Thule bike rack. This adapter also gives you 5-inches of rise which means better ground clearance, which is... view full answer...
As long as you have a 7-way trailer connector at the rear of your 2015 Land Rover Evoque that has a functioning 12 volt power circuit (5:00 pin) the Prodigy RF part # TK94FR would fit and work well. It also requires no hardwiring.
If you went with a standard controller the good news is that even then you don't have to do any actual hardwiring. It would be a matter of plugging one end of the # 3035-P into the port under the dash of your vehicle and the other end into the brake controller... view full answer...
The Universal Brake Control Wiring Adapter Ford, Land Rover, Lincoln, Mercury, part # 3035-S, will fit Land Rover LR3 and Range Rover within the model years 2005-2007. We do not have a plug-in adapter for the 2003 Land Rover Defender. That would lead me to believe that there is not a port under the dash of that year, make and model of vehicle. You will need to hardwire your Land Rover to accommodate a brake controller. You can do so with the Brake Controller 7 & 4 Way Installation Kit,... view full answer...
The wiring adapters you are talking about are for vehicles with the factory tow port. Since you do not have the tow package on your 2016 Land Rover Range Rover Sport, you will need to use a universal wiring harness. In order to install the Curt Echo Under-Dash Trailer Brake Controller # C27JR you will need the # C51515. This wiring harness plugs into the Echo on one end and splices into your vehicle wiring with the other.
Since you do not have the factory tow port, you may also need a... view full answer...
We offer a complete brake controller installation kit, part # ETBC7, that includes all components needed to install a 7-way connector on your vehicle, including connector, wiring and circuit breakers. This kit requires that your vehicle have a working 4-way flat connector installed already (such as the one that will be on the custom harness you are considering). I have included an installation video for the ETBC7 and also an FAQ article on wiring a brake controller.
We do offer hardwire... view full answer...
We do offer a roof rack option for the 2012 Land Rover Range Rover Sport that has factory installed tracks that run front to back. Rhino-Rack offers their Sportz Crossbar rack system, part # RSPT508, which consists of 42-inch low-profile oval crossbars and 46-inch tracks that attach to your Rover Sport using hardware found under rubber trim on your roof. No drilling required!
A unique feature of this roof rack system is that its legs and crossbars can be quickly and easily removed or installed... view full answer...
I do have a potential solution for you, but I do not have an extender that will measure exactly 12". At least nothing that will be rated for use while flat towing. I do have a 14" hitch extender from Gen-Y part # GY89SR. This is rated for 10,000 lbs towing and 500 lbs tongue weight.
It is recommended to use an anti rattle device like part # e99007 when using an extension. This will help to reduce any additional play at the hitch. You will also need a second hitch pin like the # e98880.
Please... view full answer...
We do offer a range of wiring adapters for U.S. standard trailer wiring to convert from, for example, 7-way to 4-way, 5-way or 6-way wiring. These various connector types are shown in the linked article on trailer wiring.
However, European trailer wiring does not combine multiple functions on one wire like U.S. wiring. U.S. 4-pole trailer connectors combine stop and turn signals on one wire; the yellow wire carries stop and left turn; the green wire carries stop and right turn. Since your... view full answer...
The 7-Way to 5-Way and 4-Way Trailer Adapter for Towing Trailers with LED Lights, part # C35FR, is designed for use on vehicles with Trailer Lamp-Out sensors. The low power draw of LED trailer lights can fool a vehicle's bulb-out sensors, causing them to display an error message. This adapter converts the trailer connector from a 7-way format to a combination 5-way and 4-way.
Similar adapter # C57003 from Curt provides the same function but keeps the trailer connector format as a 7-way... view full answer...
Unfortunately there is no 13 to 4-pin adapter. You will need to do some splicing to get the correct functions wired to a 4-pin for your trailer.
I recommend using the 4-Pole Trailer Connector and Installation Kit # C59496 for your 2008 Land Rover LR2. This kit splices into your vehicle wiring and is powered by running the included Black wire up to your battery. This ensures that your trailer will not be drawing too much power from your Land Rover tail lights. You can use a circuit tester... view full answer...
The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow. This figure also includes the weight of any cargo behind the rear axle of the tow vehicle. I attached a help article on determining tongue weight for you to check out as well. You will want the loaded tongue weight of your setup to fall right in the middle of the tongue weight range of the system you use.
That said, there aren't going to... view full answer...
Emailed Customer 04/29/15
Good Morning Stephen,
I just want to clarify. Do you have the Range Rover Sport HSE or the Range Rover HSE?
Thanks, view full answer...
As long as your 2018 Land Rover Discovery Sport HSE TD6 does not have the 5+2 seating (3rd row), the Curt # C13396 is a confirmed fit on your vehicle. If you have a Discovery Sport that is the 5+2 seating, there is not a hitch that is confirmed for use on that vehicle.
In order to finish out your towing package you'll need to add a few other parts like trailer wiring, a ball mount and hitch ball. For trailering wiring, you'll want to use the Curt T-Connector Vehicle Wiring # C56297 to... view full answer...
We have exactly what you're looking for, part # 118710. This adapter will plug into the existing European-style 7-pin and convert it to a US spec 4-pole trailer connector. view full answer...
The wheel portion of wheel/tire part # AM3S333 is called a "mod" type wheel. These are usually offered in a white or silver powder-coat finish. But we do have some black mod wheels in other wheel/tire sizes, such as 15-inch # AM32424, 14-inch # AM32131 and 12-inch # AM35354. We have none in your 13-inch size ST185/80-13.
All special trailer tires, wheels and tire/wheel combination products we offer are displayed on the linked page. view full answer...
Go To Results